• Zircon Scanner - Stud Sensor™ - i65 One Step™


Dimension:  6.21 in. H x 3.04 in. W x 1.32 in. D (158 mm) x 77 mm x 34 mm)
Weight:  5.7 oz. (161 g) without battery
Battery Type:  9V alkaline
Position Accuracy:  Up to a depth of 3/4 in. (19 mm): Typically within 1/8 in. (3 mm) for center, 3/16 in. (5 mm) for edge.  Up to a depth of 1.1/2 in. (38 mm): Typically within 1/4 in. (6 mm) for center
Depth*: StudScan mode: Up to 3/4 in. (19mm)  DeepScan® mode: Up to 1.1/2 in. (38 mm)
WireWarning® Position Accuracy*:  Typically 90-250 V at 50-60 Hz within 6 in. (152 mm) of a hot unshielded wire in drywall
WireWarning® Depth*:  In typical wall with Romex® wiring, wire can be detected up to 2 in. (51 mm) deep
Operating Temperature:  20­° to 105°F (-7° to 41°C)
Storage Temperature:  -20° F to 150° (-29°C to 66°C)
Humidity:  5-90% RH (non-condensing)
Water Resistance:  Splash and water resistant, not waterproof.
*Note: See tool's instruction. Sensing depth and accuracy can vary due to moisture, content of materials, wall texture, paint, etc. Indoor use only.

Check more:


Write a review

Note: HTML is not translated!
    Bad           Good

Zircon Scanner - Stud Sensor™ - i65 One Step™

  • Product Code: Zircon i65
  • Availability: In Stock